|
• Ordering
Feather/Cut items may be ordered using the Secure Credit Card Ordering Utility. After the utility is run, simply click on the button labeled [Feather/Cut Items]. Check off the items you wish to purchase. Your total will be automatically computed.
|
Item: |
Feather/Cut Foam Cutting Machine |
Description: |
The New Feather/Cut design offers more adjustment to cut all tapers and airfoils. Complete with all required hardware. Beautiful blue anodized components for a lifetime of modeling pleasure. Includes 28" Folding Bow. Requires THERMAL GENERATOR or suitable power source |
Price: |
$179.95 s&h $14.95 |
Requirements: |
Thermal Generator |
|
Item: |
Multi/Cut with 28" Bow |
Description: |
These
bows come with the new hotwire RedHeads.
***NOTE:
No additional s&h charges for extra Folding Bow
when ordered with Feather/Cut.***
28" FOLD
BOW - Available separately and ideal for various
foam cutting chores around the shop. For wing
panels up to 26". Perfect for rudders and
stabilizers. $54.95 s&h $9.95
40" FOLD
BOW - For wing panels up to 38". Complete
with required Feather/Cut hardware. $59.95 s&h
$11.95
52" FOLD
BOW - For wing panels up to 50". Complete
with required Feather/Cut hardware. $64.95 s&h
$12.95
|
Price: |
See
Above |
Requirements: |
None
|
|
Item: |
Roto Cut |
Description: |
This device
snaps onto the main body extrusion of the FEATHER/CUT
and is adjustable for short to long cylindrical
or conical cuts. Set the circular stops and
cut the front half of a Corsair without templates.
Adjust again for a hollow cut. With the proper
templates, and by following our proprietary
instructions, you can cut accurate elliptical
and semi-elliptical shapes like the rear half
of a Corsair. A smaller elliptical template
hollows this section. |
Price: |
$52.95 s&h $8.95
|
Requirements: |
Feather/Cut or
Body Extrusion
|
|
Item: |
Multi/Cut with 28" Bow |
Description: |
This
device features a HOTWIRE vertical to the work
surface adjustable to various angles. Create
a custom template to guide the foam through
the HOTWIRE for a freeform shape. Replace the
template with one slightly smaller for a hollow
shape, maybe a cowling for a P-38. Try a freehand
cut without a template and let your creativity
be your guide. 28" FOLDBOW includes a set
of RED/HEADS and T/370 HOTWIRE. All you need
is the THERMAL GENERATOR and INTERCONNECT WIRE
SET and your ready to cut foam |
Price: |
$179.95
s&h $14.95
|
Requirements: |
None
|
|
Item: |
Cross/Cut, a Multi/Cut accessory |
Description: |
This device is angle adjustable and is guided along
the surface of MULTI/CUT in tracks
machined under two sides of the work surface. It serves as a steady rest when
you want to feed a odd foam shape through the T/370
HOTWIRE. Locked into position CROSS/CUT serves as a guide for repeat cuts of
the same size. All of the mechanics are machined from aluminum and handsomely
blue anodized, Tekoa's trademark for quality and
durability. |
Price: |
$43.95
s&h $8.95
|
Requirements: |
Multi/Cut
|
|
Item: |
Straight/Cut, a Multi/Cut accessory |
Description: |
A 6" x 24" fence, easily attaches to CROSS/CUT to accurately guide large foam blocks through
the hot wire. A necessary accessory when cutting blocks into sheets for cutting
wings and stabilizers with FEATHER/CUT. |
Price: |
$32.95
s&h $8.95
|
Requirements: |
Multi/Cut
|
|
Item: |
Circle/Cut, a Multi/Cut accessory |
Description: |
This device enables MULTI/CUT to cut cylinders, hollow cylinders, cones and hollow
cones without templates. Simply set the CIRCLE/CUT to the radius of the circular
cut desired, place the block of foam on the pivot point and turn the foam.
You'll get a true and perfect cut. Reset the stop for a hollow cut. Sounds like
you're making a cowling for a corsair. |
Price: |
$54.95
s&h $8.95
|
Requirements: |
Multi/Cut
|
|
Item: |
Thermal Generator |
Description: |
NEW! 60 % increase
in power speeds you through those long wing
cuts. Engineered specially to power T.370 hot
wire for optimum temperature control. Simply
center control knob with bow setting for automatic
212/225 degree wire temperature. 120 volt. Takes the "waste" out of foam cutting |
Price: |
$144.95
s&h $9.95
|
Requirements: |
None
|
|
Item: |
Red-Heads |
Description: |
The RED/HEADS
are hot wire retainers that attach to the end
of the FEATHER/CUT FOLDBOW
spring rods. They feature locking screws to
attach the T-370 hot wire. Simple and convenient,
the RED/HEADS are machined from 6061-T6 aluminum
with an internal diameter honed to a vacuum
fit to the spring rods. Featuring jewel-like
red anodized finish, the RED/HEADS will give
years of devoted service and maybe even some
long over due companionship. The RED/HEADS are
hot and they're going fast. RED/HEADS are supplied
with all FOLDBOWS. |
Price: |
$5.95
s&h $4.95
|
Requirements: |
None
|
|
Item: |
Body
Extrusion |
Description: |
Mounting base
for ROTO/CUT. required if you do not have FEATHER/CUT.
|
Price: |
$69.50
s&h $12.50
|
Requirements: |
None
|
|
Item: |
T370 HotWire |
Description: |
Special high tensile (20% higher than music wire) carbon wire exclusive with Feather/Cut. Less thermal expansion than nichrome wire. .018 dia x 8' spool. |
Price: |
$4.95 s&h $1.50 (no shipping charge if ordered with any other item). |
Requirements: |
None |
|
Order | Quick Tour | Support | Search | Company 
Feather/Cut :: Product Details
